MATERIAL :

  • HDPE plastic

YOU WILL RECEIVE:

  • 3 x HDPE plastic MOLDS

– 1 x 100mm base
– 1 x 120mm base
– 1 x 1400mm base

PRODUCT DESCRIPTION:

The molds are based on the geometry of the Nubian pyramids.

So far, more than 35 pyramids grouped in five sites were discovered in Sudan. The area of the Nile valley known as Nubia, which lies within the north of present-day Sudan, was home to three Kushite kingdoms during antiquity.

The Nubian pyramids are pyramids that were built by the rulers of the ancient Kushite kingdoms to serve as tombs.

The physical proportions of the Nubian pyramids differ markedly from the Egyptian edifices: they are built of stepped courses of horizontally positioned stone blocks and range approximately 6–30 meters (20–98 ft) in height, but rise from fairly small foundation footprints, resulting in tall, narrow structures inclined at approximately 70°.

Weight919 g

Reviews

There are no reviews yet.

Be the first to review “Pyramid Mold Set, 100mm+120mm+140mm Base, Nubian Pyramid, 72 degrees”

Your email address will not be published. Required fields are marked

All orders are shipped from our warehouse within 48-72 hours of the order being placed. Purchases shipped anywhere in the continental United States will arrive within 15-20 business days of the order date. Orders being shipped in Europe generally arrive within 7-15 business days of the order date.

You can check through the tracking number provided.

We can upgrade your shipping provider to DHL/FedEx/ DPD, but it costs extra. The delivery time even to the USA is 3 working days.

No, releasing lubricants needed, however, feel free to use one if you desire.

For our plastic molds, we use HDPE 300 and for our silicone molds, we use platinum cured, food-safe silicone.

When casting you should use the pre-glazing technique, in order to prevent any stones or metal shavings being in direct contact with the side of the mold, in order to do that when you pour the resin into the mold you do it by spreading a thin layer of resin on the inside part of the mold, just cover the sides with resin, it will form that thin layer that will prevent any shavings or stones showing up on the final castings. You should do that every time you are pouring resin into the mold. When you are closing the mold the first thing you need to do is to place tape along the open side of the mold, then to tighten the mold you can place one or a few more strings of tape across the edge horizontally until you close the gap complacently.

All silicone molds are FDA food safe approved, HDPE molds also can be used for casting food but they can not be heated when containing food

These molds can be used for resin, Candle making, Jewelry making, Molding & Casting, Sculpture, Soapmaking & bath.

Yes, but the lifespan of the molds won’t be so long. We use platinum cured silicone, not cheap tin cured one, the number of castings greatly depends on the chemistry of the resin used, the slower the curing the better as the heat released from the resin is less. There can be issues from the temperature that the resin build wile curing, we do recommend using layers when casting in the molds as you limit the heat this way.

Pyramid Mold Set, 100mm+120mm+...

$39.43